Call us now :
01743 289 418
0
Total:  £0.00

Sammic Pro P-35 Glass Washer

Key Features
420 x 495 x 645 mm (WxDxH)
400 mm
Gravity Drain
1 Year Set Guarantee
Product Brand:   Sammic
Product Code:   P-35
Product Condition:   New
List £1,121.00
£581.99 ex VAT
698.39 inc VAT)
Send to a friend
The Sammic Pro P-35 glass washer range offers an electro mechanical control panel, 350 mm basket and a maximum glass height of 220 mm.
Manufacturer : Sammic
Model Reference : P-35
Basket Size : 350 mm
Drain Pump Included : No
Useable Height (mm) : 220
Break Tank : No
Rinse Aid Dispenser : Yes
Internal Water Softener : No
Cycle Time (Seconds) : 120
Detergent Pump : Yes
Dimensions : 420 mm wide x 495 mm deep x 645 mm High
Fill : No
Outlet Pipe :
Wash Tank Temp :
Rinse Boiler Temp :
Wash Tank Capacity :
Comsumption per Cycle :
Installation Available :
Amps :
Watts : 2075
Power - Kwh/24h : 2.1 Kw
Power Supply : 13 amp plug
Weight : 31 Kg

Production : 30 baskets per hour
Basket : 350 x 350 mm
Electro mechanical control panel
Independent boiler
Removable stainless steel rack holders ensure even distribution of wash water without dead zones. Precision positioned water jets guarantee optimum washing result for even the most stubbornly stained glasses. Easy to assemble, boltless rinse spray arms.
Pre-set 2 min wash cycle
Double skinned door
Very easy and intuitive use
Complete with detergent and rise aid dosing equipment
Wash pump : 75 W / 0.1 HP
Wash tank : 1.5 W
Rinse Tank : 2 W
Complete with 1 open square basket for small plates and glasses and 1 small cutlery basket


What to look for when buying a glass washer
Always check size of basket Usually 350mm (12 pints), 400mm (16 pints) or 500mm (25 pints) based on Nonic pint glasses
Electrical Supply 13 amp (plug) hard wired single phase or three phase.
Water Connection Usually a 3/4 inch BSP connection
Drain Pump Required when the drainage is higher than the dishwasher drain outletBreak Tank otherwise known as Type A air gap. Required to conform to the water regulations so that in the unlikely event of the machine becoming blocked the dirty water will not siphon back into the mains water system. Booster Pump Required to boost water pressure therefore ideal where the water pressure is low (below 2 bar). Hot fill machine should consider a booster pump.
Softeners If you have hard water if so you will need a water softener. Approx 8 Ltrs for 350mm and 400mm basket machines and 12 Ltrs for 500mm machines. Water softeners reduce your existing water pressure by around half a bar.


Standard Delivery Costs : FREE UK Mainland
Standard Delivery Timescale : 3 - 5 working days (Monday to Friday)
Delivery Option :
Unpack and Position :


Guarantee : 1 Year Set Guarantee
Parts Guarantee : 1 Year Included
Labour Guarantee : 1 Year Included

Write an online review and share your thoughts with other shoppers!

Be the first to review this product